I have noted that recently there is an unusual loud friction / cracking / gears (hard to describe) sound in the pushing part of the pitch axis. It is not available in the pulling part of the pitch axis or in the yaw axis.
I do not have any of this sound in the stick or rudder from Brunner at all.
The yoke is still smooth but the sound is making me anxious. I am not sure what this is.
I have the same problem on the pitch axis, and i have to say i’s quite annoying when you pay over 1000 Euro for it, i won’t return it cause i will have to pay the import taxes again, which i don’t want since i paid over 300 for them.
i leave an attachment with a video to better explain the issue:
This sound is normal if you move the yoke same as in the video
Thank you Stefan i was just wondering if this was normal or not and btw it doesn’t bother me too much because i can’t feel it when handling the yoke and i can’t ear it either because of the engine sound of the aircraft.
This is not my case. What is in the video above is the shaft friction noise. What I have is cracking noise at the end of the range. I have V367
You must be logged in to reply to this topic.
BRUNNER ELEKTRONIK AG
tel +41 (0)44 953 1010
fax +41 (0)44 953 1019