Gear Grinding When Turning

BRUNNER Forum Forums Products CLSE-Yoke Gear Grinding When Turning

This topic contains 2 replies, has 1 voice, and was last updated by  vp49p3 4 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1658

    vp49p3
    Participant

    I have the CLSE yoke, with the latest software. When I turn the ailerons, there is a slight “gear grinding” noise. This does not happen when I work the elevator–only when using the ailerons. The noise is there no matter if there is a lot of force or very little force feedback on the yoke. It occurs no matter what aircraft or profile is used, but does not appear to have any affect on the operation of the yoke, which works perfectly. The noise is not there when the yoke is disconnected from the CLSE software. Is this normal? Thanks.

    #1664

    vp49p3
    Participant

    Forgot to mention that I’m flying P3Dv4.4.

    #1670

    vp49p3
    Participant

    Anybody?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

BRUNNER ELEKTRONIK AG

Industriestrasse 27
CH-8335 Hittnau

tel +41 (0)44 953 1010
fax +41 (0)44 953 1019

info(at)brunner-innovation.swiss

Help-Desk