Prepare3D V1-V4

This topic contains 6 replies, has 2 voices, and was last updated by  sbrunner 2 years ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #238

    sbrunner
    Keymaster

    Support for all versions V1 to V4
    Important: MSFX plugin installer.exe must be run once on the machine running Prepare3D
    If this step is not done connection problems could appears
    See also
    https://cls2sim.brunner-innovation.swiss/Prerequisites.htm

    #605

    jovabra
    Participant

    Hi all,
    Just bought the iFly 737 for Prepar3Dv4. A lot of problems to control the sim. After take-off aircraft (AP engaged) increasing pitch up until 25 deg and of course a speed drop to stall speed etc. A few moments later a nose down action with an overspeed warning.
    If i disconnect CLS2sim and engage the auto pilot everything is stable. The only solution is the connect to the vJoy mode.
    Regards
    John

    #611

    sbrunner
    Keymaster

    Hello John

    Please open a Ticket in our new helpdesk

    Helpdesk

    Tell us also a bit more about
    CLS2Sim Version?
    Settings for Autopilot in CLS2Sim?

    Regards

    Stefan Brunner

    #612

    jovabra
    Participant

    Stefan,
    Problem solved. There is an option in the iFly confiuration program to disable the joy-stick in the AP mode.
    Strange but thru. All functions working correct.
    Regards
    John

    #613

    sbrunner
    Keymaster

    Hi John

    Thanks for the feedback
    Can you tell us which version you use from iFly?
    So we will make a compatibility list for all the aircraft plugins…

    And maybe you can upload your profile to our Profile Cloud with description

    Regards

    Stefan Brunner

    #614

    jovabra
    Participant

    Stefan,
    The latest iFly 737 for Prepar3d V4. version 3.2.3 with hotfix1
    I am using my upload 737 profile
    Regards
    John

    #615

    sbrunner
    Keymaster

    Hi John

    You mean Test737 Profile
    Can you add a note in the description of the Profile for which planes/plugins you have tested it

    Thanks

    Regards

    Stefan Brunner

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

BRUNNER ELEKTRONIK AG

Industriestrasse 27
CH-8335 Hittnau

tel +41 (0)44 953 1010
fax +41 (0)44 953 1019

info(at)brunner-innovation.swiss

Help-Desk