Turn Coordinator

BRUNNER Forum Forums Products CLS-E Rudder Turn Coordinator

This topic contains 2 replies, has 2 voices, and was last updated by  rufus 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1643

    rufus
    Participant

    I have the CLS-E MK II YOKE and the CLS-E RUDDER with Toe Brakes.
    I have a problem and need a little help.

    When using the CLS-E RUDDER with Toe Brakes the Turn Coordinator When in the air Turn Coordinator is always rolled to the right when in strait and level flight.

    As a RWP flying a 172 … i know this is not right.

    I have ask for tech support and have not receive it… so why would anyone spend $5,000 with this stuff if you can not get support.

    #1645

    sbrunner
    Keymaster

    Hi
    As far as i know we do not control the Turn Coordinator from our Software directly
    But you can try following, disconnect the Simulation in CLS2Sim (when you have the effect) and check if you still have the behavior
    Regards
    Stefan Brunner

    #1647

    rufus
    Participant

    You are right and i was wrong…
    after unplugging the CLS2Sim and plugging-in the old yoke… i have the same problem.
    So sorry for the trouble…

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

BRUNNER ELEKTRONIK AG

Industriestrasse 27
CH-8335 Hittnau

tel +41 (0)44 953 1010
fax +41 (0)44 953 1019

info(at)brunner-innovation.swiss

Help-Desk